August 18, 2024, 11:18:10 PM

Author Topic: Toy's n' That....  (Read 89168 times)

Offline Lord Borak

  • Full Member
  • *
  • Posts: 487
    • Loc: United Kingdom
Re: Toy's n' That....
« Reply #240 on: April 03, 2019, 09:59:04 PM »
Thanks guys :D

To be fair, the later Fanatic/Specialist games stuff was all pretty poor. The Dark Eldar ships, Tau and Imperial Grand Cruisers are all awful in my opinion. The Space station suffers from that era as well. It's just random bits of weapon batteries and turrets covered with awkward bits of plasticard. Plasticard that's not even stuck or cut straight. Don't get me started on the later Inquisitor 54mm models *shudders*


Offline Malika

  • Full Member
  • *
  • Posts: 1564
    • Loc: Netherlands
    • Bits Blitz
Re: Toy's n' That....
« Reply #241 on: April 04, 2019, 07:46:37 AM »
And don't get me started on that awful Warhound they did...
Bits Blitz - the place to be for all your bits needs!

Offline osjclatchford

  • Full Member
  • *
  • Posts: 557
    • Loc: chigwell, essex, uk
Re: Toy's n' That....
« Reply #242 on: April 04, 2019, 06:30:27 PM »
Quote
And don't get me started on that awful Warhound they did...
[/b][/i]

twas that the one with the bloody purity seal on it. I mean, shit man, how big was that parchment and how did the make a wax seal the size of a marine in terminator armour?!
2017 Droppod Studios -  A subsidiary of the OSJC

Offline Bessemer

  • Full Member
  • *
  • Posts: 339
    • Loc: UK
Re: Toy's n' That....
« Reply #243 on: April 04, 2019, 06:45:08 PM »
I'd rather have that warhound than the Inquisitor Genestealer...
I refuse to be killed by something I've never heard of.

Offline Lord Borak

  • Full Member
  • *
  • Posts: 487
    • Loc: United Kingdom
Re: Toy's n' That....
« Reply #244 on: April 06, 2019, 11:14:01 PM »
The genestealer? Man, that wasn't even that bad. The Callidus assassin, the Stevedores....... Man. They make the Genestealer look good  :o

Anyway, I had an old miscast Conveyor that has been kicking around since the very first batch. It was a bit knackered after I let my little'un play with it and paint it as well.......... but it was still workable and after some TLC turned out ok I think. I had an idea about a more rounded prow with a little flight bay on the underneath as well. Also changed the 'Mass Pods' to ones more like the art work.

The conversion and paint job is a bit of a rush job. I did it all today.









Offline Chios

  • Active Member
  • *
  • Posts: 126
Re: Toy's n' That....
« Reply #245 on: April 07, 2019, 08:33:18 AM »
Awe-inspiring!

Offline osjclatchford

  • Full Member
  • *
  • Posts: 557
    • Loc: chigwell, essex, uk
Re: Toy's n' That....
« Reply #246 on: April 07, 2019, 10:57:30 AM »
Noice! I take it it's three million years into deep space..?
2017 Droppod Studios -  A subsidiary of the OSJC

Offline marell le fou

  • Full Member
  • *
  • Posts: 1154
Re: Toy's n' That....
« Reply #247 on: April 08, 2019, 09:42:36 PM »
Nice painting !Love that red. And the massive look.

Offline horizon

  • Mod
  • Veteran member
  • *
  • Posts: 4197
  • Destiny Infinity Eternity
Re: Toy's n' That....
« Reply #248 on: April 09, 2019, 07:28:02 PM »
Very well done. Great to see people still doing this.

Offline Lord Borak

  • Full Member
  • *
  • Posts: 487
    • Loc: United Kingdom
Re: Toy's n' That....
« Reply #249 on: April 09, 2019, 10:25:11 PM »
Thanks chaps! Well, bit busy with work at the moment so not really done anything other than build a shed load of Falchions and convert and spruce up my old cruisers. In regards to a light cruiser. What do people like more, a Dauntless style hull (with Voss prow) or an Endeavour style hull?

Noice! I take it it's three million years into deep space..?

2,960,000 years to go mate!!

Offline osjclatchford

  • Full Member
  • *
  • Posts: 557
    • Loc: chigwell, essex, uk
Re: Toy's n' That....
« Reply #250 on: April 10, 2019, 06:39:43 AM »
...In regards to a light cruiser. What do people like more, a Dauntless style hull (with Voss prow) or an Endeavour style hull?

Well. Everyone seems to love the endeavour style but I put that down to how short lived the line from gw were.
Also the ability to swap out the plastic gundecks etc is obviously favourable, conversion wise.
It seems that these days we seem to be comparitively swamped with third party versions of them.
I've done enough that's for sure!
However, I've never seen a voss prow on a dauntless hull. would be interesting to see for sure... I toyed with the idea couple 'o' years back now as I had a load of Voss prows but dauntless' are hard to come by. Now even more...
« Last Edit: April 10, 2019, 06:43:12 AM by osjclatchford »
2017 Droppod Studios -  A subsidiary of the OSJC

Offline Lord Borak

  • Full Member
  • *
  • Posts: 487
    • Loc: United Kingdom
Re: Toy's n' That....
« Reply #251 on: April 19, 2019, 09:56:14 PM »
Think I might end up doing one of each to be fair. Or at least an endeavour with a Voss style row for dauntless conversions. We'll see! I have some holiday booked next week and the week after so expect some plasticard shenanigans in the near future :D

Right, been touching up some of my old Voss ships. Nothing major, a bit of neatening up and I removed the Lances for launch bays. Not before I added magnets to everything though so I can swap the weapons. I also spruced up my Battleship with magnets and a little more effort into the paintjob.




Also managed to get through 12 out of 18 falchion escorts. I've always hated that narrow mid ship corridor thing. So removed it. Kinda like it. They look gooty, stubby and pretty low tech. Perfect for my fleet really :D




I've had the majority of a battleship kicking around for ages. It's missing the front section and I had been hoping to pick one up on ebay at some point. Alas, none have appeared so I have decided to bite the bullet and make the missing part. I have now realised how much work is actually involved in doing this and wish I hadn't started :( But, I have started. And I WILL finish it. Dammit. Gonna go for a more armoured up Voss style prow. Basically a scaled up version of the Falchion escort prow.





Offline osjclatchford

  • Full Member
  • *
  • Posts: 557
    • Loc: chigwell, essex, uk
Re: Toy's n' That....
« Reply #252 on: April 20, 2019, 06:27:44 AM »
Looking forward to seeing that completed. Also nice idea with the falchions... Good effect
2017 Droppod Studios -  A subsidiary of the OSJC

Offline Chios

  • Active Member
  • *
  • Posts: 126
Re: Toy's n' That....
« Reply #253 on: April 20, 2019, 07:34:13 AM »
This battleship is gonna be awesome! Nice effect with the falchions, it suits them well.

Offline Lord Borak

  • Full Member
  • *
  • Posts: 487
    • Loc: United Kingdom
Re: Toy's n' That....
« Reply #254 on: April 20, 2019, 10:42:06 PM »
Thanks guys. Really regretting starting this now. I'm in awe of the original builders now, the detail on these ships is amazing and you just don't appreciate it until you try and copy it. I'm also regretting it because...... because a new battleship means a new fleet.... So, what shall I do with this fleet then? :D


Progress report.

Starboard

Port

Underside




More Ships on the go. Yes, there are a lot of eclectic models on my painting table right now. (OSJC, recognise the one on the top right?)