July 20, 2024, 12:31:38 AM

Author Topic: Modelling bits for 3d printing  (Read 110384 times)

Offline Malika

  • Full Member
  • *
  • Posts: 1563
    • Loc: Netherlands
    • Bits Blitz
Re: Modelling bits for 3d printing
« Reply #210 on: December 04, 2016, 01:20:24 PM »
The Centurion Battle Tank I designed is out!

Novan Regulars Centurion Main Battle Tank:

Quote
The centurion main battle tank is the most common tank used by novan regular forces in the field a rugged and heavily armoured design it has been built to be a reliable and easy to operate vehicle capable of going long periods of time between maintenance cycles making it the perfect machine to equip Tusculum Nova’s armoured divisions.

The designs has seen many weapon fits over the years but the most common armaments (hector configuration) are a regular tank cannon in the turret backed up by a fixed forward hull mounted laser cannon. In addition the hull sides can be configured to mount a sponson weapon most commonly a HMG for close in anti personel protection.

Pack contains 3 x centurion tanks with modelling options.

Please note that this is the first of several weapon fits we will have for this tank with a long barelled anti tank cannon (achilles configuration) on the cards next.

£10.70
http://vanguardminiatures.co.uk/shop/novan-regulars-centurion-main-battle-tank/

Bits Blitz - the place to be for all your bits needs!

Offline Malika

  • Full Member
  • *
  • Posts: 1563
    • Loc: Netherlands
    • Bits Blitz
Re: Modelling bits for 3d printing
« Reply #211 on: December 25, 2016, 01:23:05 PM »
A little Christmas present, five upcoming variants of the Centurion main battle tank.

Please let me know your thoughts!

Plasma tank:


Light vehicle hunter:


Laser tank:


Anti-infantry tank:


Conqueror tank:
Bits Blitz - the place to be for all your bits needs!

Offline Malika

  • Full Member
  • *
  • Posts: 1563
    • Loc: Netherlands
    • Bits Blitz
Re: Modelling bits for 3d printing
« Reply #212 on: January 21, 2017, 02:13:06 PM »
The Apocalypse Heavy Battle Tank I've designed for Vanguard Miniatures is as good as ready. All I need before shipping it off for printing is some final feedback.

So any suggestions, comments, etc. are more than welcome. :)


Bits Blitz - the place to be for all your bits needs!

Offline Stormwind

  • Veteran member
  • *
  • Posts: 2750
  • Ben Sibbald | Newcastle, UK
Re: Modelling bits for 3d printing
« Reply #213 on: January 22, 2017, 01:00:19 AM »
That's a big chunky turret <3
My Personal & Modelling Blog >>http://theancienttrack.blogspot.co.uk/

Offline Jimmy Zimms

  • Full Member
  • *
  • Posts: 421
  • Beshert is Beshert
    • Loc: World Traveler
Re: Modelling bits for 3d printing
« Reply #214 on: January 23, 2017, 07:52:28 PM »
MMMMMMMMM that's a tasty KV-2 IN SPAAAAAAACE!!!!
As we Imperials say, "The Emperor [class battleship] Protects..."

Offline Malika

  • Full Member
  • *
  • Posts: 1563
    • Loc: Netherlands
    • Bits Blitz
Re: Modelling bits for 3d printing
« Reply #215 on: March 11, 2017, 01:40:55 PM »
My Centurion tanks, painted by the talented Mike Salwey:




Bits Blitz - the place to be for all your bits needs!

Offline Stormwind

  • Veteran member
  • *
  • Posts: 2750
  • Ben Sibbald | Newcastle, UK
Re: Modelling bits for 3d printing
« Reply #216 on: March 11, 2017, 09:57:07 PM »
Gorgeous!
My Personal & Modelling Blog >>http://theancienttrack.blogspot.co.uk/

Offline andydorman

  • Active Member
  • *
  • Posts: 77
    • Loc: Leeds
Modelling bits for 3d printing
« Reply #217 on: March 12, 2017, 08:33:33 AM »
I'm going to have to pick up some of these, they look great. Deceptively simple and well executed paint job as always from Mike...

Offline Malika

  • Full Member
  • *
  • Posts: 1563
    • Loc: Netherlands
    • Bits Blitz
Re: Modelling bits for 3d printing
« Reply #218 on: March 15, 2017, 05:57:22 PM »
Novan Warriors with AA weapon upgrades, painted by the talented Mike Salwey:


Bits Blitz - the place to be for all your bits needs!

Offline Malika

  • Full Member
  • *
  • Posts: 1563
    • Loc: Netherlands
    • Bits Blitz
Re: Modelling bits for 3d printing
« Reply #219 on: March 20, 2017, 07:09:09 PM »
My gun tower design has just been released! :D

Novan Sentinel Sentry Tower x 2:




Quote
The Sentinel class sentry tower is a modular armoured defence system seen across novan space. The system can be fully automated or semi automated with a single weapons operator. Designed to allow construction at various heights dependant on the local terrain or situation and with many different weapon load out options this is a versatile and rugged design that has seen great success during it’s time in service.

Set consists of two multi part sentry tower models with weapon options.

Tower height is: 55mm with turret in place.

£8.00
http://vanguardminiatures.co.uk/shop/novan-sentinel-sentry-tower-x-2/
Bits Blitz - the place to be for all your bits needs!

Offline Easy e

  • Full Member
  • *
  • Posts: 263
Re: Modelling bits for 3d printing
« Reply #220 on: March 22, 2017, 02:25:28 PM »
Novan Warriors with AA weapon upgrades, painted by the talented Mike Salwey:



I want to get my hands on some of those for Aeronautica Imperialis and Horizon Wars for sure!
Do you like Free Wargames?
http://bloodandspectacles.blogspot.com/

Offline Malika

  • Full Member
  • *
  • Posts: 1563
    • Loc: Netherlands
    • Bits Blitz
Re: Modelling bits for 3d printing
« Reply #221 on: March 22, 2017, 02:30:29 PM »
Please do! Also keep on mind that the gun towers' turrets are compatible with this tank kit.
Bits Blitz - the place to be for all your bits needs!

Offline marell le fou

  • Full Member
  • *
  • Posts: 1154
Re: Modelling bits for 3d printing
« Reply #222 on: April 05, 2017, 10:18:51 PM »
I love your ground buildings ! Nice addition to your production.

Offline Malika

  • Full Member
  • *
  • Posts: 1563
    • Loc: Netherlands
    • Bits Blitz
Re: Modelling bits for 3d printing
« Reply #223 on: April 06, 2017, 03:58:56 PM »
Thank you!

By the way, expect this kit to be out soon as well:

Bits Blitz - the place to be for all your bits needs!

Offline Malika

  • Full Member
  • *
  • Posts: 1563
    • Loc: Netherlands
    • Bits Blitz
Re: Modelling bits for 3d printing
« Reply #224 on: April 08, 2017, 01:36:10 PM »
The first batch of variants of the Centurion Battle Tank have been cast:




Sniper tank:


Siege tank:


Autocannon tank:


Plasma cannon tank:


Laser cannon tank:


Bits Blitz - the place to be for all your bits needs!