September 27, 2024, 10:21:04 AM
« previous next »
Pages: [1]   Go Down

Author Topic: [WM] High Elf Spears  (Read 4121 times)

Offline Simulated Knave

  • Lurker
  • *
  • Posts: 6
[WM] High Elf Spears
« on: April 24, 2009, 03:35:01 AM »
As many know, High Elf spearheads snap like the matchsticks of the faerie folk.  Needless to say, my forces are beginning to look a little rag-tag. 

Any advice or ideas on how to deal with this?  I'd been considering trying to shape the remaining staffs into something slightly bladed or somehow disguising them as really long-handled maces that are being held upside down.  For the still intact ones, I'm likely going to clip them off short and hope the remainder is strong enough.  What's worked for other people to save/repair High Elf spears? 
Logged
Octavulg in other climes. 
Proud player of Epic, BFG, Warmaster and Space Hulk

Offline azrael71

  • Warmasterplaytest team
  • Full Member
  • *
  • Posts: 896
Re: [WM] High Elf Spears
« Reply #1 on: April 25, 2009, 07:30:33 AM »
If someone came up with a viable solution for this it would quite possibly be the BEST article on warmaster ever.
I have a lot of spearmen and I get the same problem.
Where were the Quality Assurance team the day those models got previewed ???
Swordmasters and Phoenix guard are much more resilient models just a shame they are so rare and expensive these days :(
Logged

Offline Simulated Knave

  • Lurker
  • *
  • Posts: 6
Re: [WM] High Elf Spears
« Reply #2 on: April 25, 2009, 02:46:53 PM »
What's worse is that plastic High Elves would be greatly more durable...

Ah well.  I'll try trimming the spears and see how that works.  :)  At least there may be a preventative measure. 
Logged
Octavulg in other climes. 
Proud player of Epic, BFG, Warmaster and Space Hulk

Offline Chaos_Rabbit619

  • Active Member
  • *
  • Posts: 55
Re: [WM] High Elf Spears
« Reply #3 on: April 25, 2009, 04:23:35 PM »
i may have an idea or two...can u post a pic what they look like ( a close up one and one actual size)?
Logged

Offline Simulated Knave

  • Lurker
  • *
  • Posts: 6
Re: [WM] High Elf Spears
« Reply #4 on: June 07, 2009, 04:01:55 AM »
Well, after a month, I finally got back to my Warmaster stuff.  Took some High Elves, and took some old nail clippers to their spears, in an attempt to make them more durable. 

Worked pretty well, IMO (though fixing the broken ones is still tricky - I'm thinking of gluing the extra spearheads on to the shafts).  The remainder's fairly tough and much harder to bend.  Also looks a little less silly, which is a plus.  They now look like some kind of halberd.  :) 

Hopefully tomorrow I'll get the primer out and actually paint up a few units of my High Elves.  I'll also post some pictures of just what I did. 
Logged
Octavulg in other climes. 
Proud player of Epic, BFG, Warmaster and Space Hulk

Offline azrael71

  • Warmasterplaytest team
  • Full Member
  • *
  • Posts: 896
Re: [WM] High Elf Spears
« Reply #5 on: June 07, 2009, 09:50:21 PM »
Looking forward to detailed instructions and pictures.
If this is a winner, you should patent the idea.
Logged

Offline azrael71

  • Warmasterplaytest team
  • Full Member
  • *
  • Posts: 896
Re: [WM] High Elf Spears
« Reply #6 on: July 02, 2009, 08:56:03 AM »
Any updates on this?
I have 12 units awaiting my attention ;)
Logged

Offline Carrington

  • Full Member
  • *
  • Posts: 212
Re: [WM] High Elf Spears
« Reply #7 on: July 03, 2009, 12:27:42 AM »
Quote from: azrael71 on July 02, 2009, 08:56:03 AM
Any updates on this?
I have 12 units awaiting my attention ;)
Fairly good luck with flat head pins and hands filed flat.

Also, baking soda is a very good way to augment the bonding capability of superglues: though I havent tried this on elf spears.
Logged
Pages: [1]   Go Up
« previous next »